Sony UP-CR20L - Manual (Page 43)

43
Using Expansion CompactFlash Cards
Cha
p
te
r 4
A
d
v
a
nc
ed Se
tt
ing
s
3
Insert the CD-ROM into the CD/DVD drive, and touch
the [OK] button on the screen.
The data is copied from the CD-ROM onto the
expansion CompactFlash card.
When copying is complete, the tray will open. Remove
the CD-ROM.
Copying User Created Data
You can create original promotional images and templates
for border prints, and copy the data for use on this unit.
Use a memory card or USB memory device to copy data
created on a computer onto the expansion CompactFlash
card.
1
Connect a memory card or USB memory device to
your computer.
2
Copy the user created data onto the memory card or
USB memory.
Structure the folders on the memory card or USB
memory device in the same way as the folders on the
expansion CompactFlash card. For details on folder
structure, see “Directory Structure for Expansion
CompactFlash Folders” on page 41.
If a file path consists of more than 200 characters or
includes non-alphanumeric characters, the unit may
not be able to read the file.
3
Confirm that an expansion CompactFlash card is
installed in this unit.
4
Open the Template tab on the administration screen.
5
Touch the [Copy All] button.
6
Insert the memory card or USB memory device on
which the data is copied into the appropriate slot on the
unit.
All of the data is copied from the memory card or USB
memory to the expansion CompactFlash card.
Deleting All Data on the Expansion
CompactFlash Card
You can delete all of the data stored on the expansion
CompactFlash card by touching the [Delete All] button in
the Template tab of the administration screen.
All folders and files stored under the “\Sony\UPCR20\”
folder on the expansion CompactFlash card will be
deleted. This includes folders and files that are read-only.
Setting Promotional Images
J Applicable modes: Full mode, Quick Print
mode
You can display any desired promotional images while the
unit is in the standby state.
Up to five promotional images can be set to be displayed
sequentially.
In addition, when promotional images are set for display,
you can also select whether or not to display the standard
start screen.
Creating promotional images
Use any commercially available photo editing software to
create the promotional images.
Store the newly created promotional images in the
“\Sony\UPCR20\Promotion\” folder on a memory card or
USB memory.
Promotional image specifications
Image size: 640 × 480 pixels
File format: JPEG or 24-bit bmp
(Baseline JPEG. Progressive JPEG is not supported.)
File names: promo1.jpg/bmp – promo5.jpg/bmp
File location: \Sony\UPCR20\Promotion
Copying promotional images to the unit
1
Make sure that an expansion CompactFlash card has
been inserted.
2
Open the Template tab on the administration screen
and then touch the [Copy All] button.
Note
Note