Samsung VP-D23i EN - Manual (Page 23)

23 23
ENGLISH
Preparation
Connecting a Power Source
There are two types of power source that can be connected to your camcorder.
-
The AC Power Adapter and AC cord : used for indoor recording.
- The Battery Pack : used for outdoor recording.
To use the AC Power adapter and DC Cable
1. Connect the AC Power adapter to the AC
cord.
2. Connect the AC cord to a wall socket.
Reference
The plug and wall socket type may differ
according to your resident country.
3. Connect the DC cable to the DC jack
socket of the camcorder.
4. Set the camcorder to each mode by
holding down the tab on the power switch
and turning it to the CAMERA or
PLAYER mode.
To select the CAMCORDER mode
✤ If you want to use this unit as a camcorder,
set the mode switch to TAPE position.
✤ If you want to use this unit as a DSC
(Digital Still Camera), set the mode switch to
MEMORY STICK position.
-
-
1.
2.
3.
4.
CAMERA PLAYER
✤
✤ DSC
MUL TI