Samsung VP-D23i EN - Manual (Page 63)

✤ AUDIO DUBBING
✤ 12
✤
✤
1. PLAYER
■
■ A/V
AUDIO/VIDEO /
A/V /
VP-D23i/D24i
MENU MENU
DIAL A/V ENTER
MENU DIAL
AV IN/OUT A/V IN ENTER
2. PLAY/STILL /
3. PLAY/STILL /
4. A.DUB
■ A.DUB
■
5. PLAY/STILL /
■ STOP
■
■
External A/V A/V
AUDIO/VIDEO /
VP-D23i/D24i
Advanced Recording
63 63
ENGLISH
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in
SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■ If you want to use an external microphone,
connect the microphone to the external MIC input
jack on the camcorder.
■ When you wish to dub using the External A/V
input, connect the AUDIO/VIDEO cable to the
camcorder by inserting the cable jack into the
A/Vin/out terminal at the left side of the
camcorder. (VP-D23i/D24i only)
-
Press the MENU button, turn the
MENU DIAL to highlight A/V and
press the ENTER button.
- Turn the MENU DIAL to highlight
AV IN/OUT and press the ENTER button to
select AV IN.
2. Press the (PLAY/STILL) button and
find the timeframe of the scene to be dubbed.
3. Press the (PLAY/STILL) button to
pause the scene.
4. Press the A.DUB button on the
Remote Control.
■ A.DUB will be displayed on the LCD.
■ The camcorder is in a ready-to-dub
state for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
■ Press the (STOP) button to stop the dubbing.
Reference
■ You can not use the audio dubbing function while playing a write protected
video tape.
■ When you wish to dub using the External A/V input, you must connect the
AUDIO/VIDEO cable to the audio system from which you wish to record.
(VP-D23i/D24i only)
Audio dubbing
SA MS UN G CA M C O R D E R LE N S 10 X ZO O M
SA MS UN G CA M C O R D E R LE N S 10 X ZO O M
E A S Y R E V F W D S S H O W R E C S E A R C H FA D E B L C
(VP-D23i/D24i only)
AV IN
Audio (R) Audio (L)
Audio dubbing