Samsung VP-D23i EN - Manual (Page 79)

79 79
ENGLISH
IEEE 1394 Data Transfer
● System requirements
■ CPU : faster Intel ® Pentium III™ 450Mhz compatible.
■ Operating system : Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■ Main memory : more than 64 MB RAM
■ IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable (VP-D23i/D24i only)
1. Set the power switch to PLAYER
mode.
2. Connect the DV cable (not supplied)
from the DV IN/OUT port of
the camcorder to the DV IN/OUT port
of the other DV device.
■ Make sure that DV IN appears on
the screen.
3. Press the START/STOP button to begin
REC PAUSE mode.
■ PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
■ If you want to pause recording momentarily,
press the START/STOP button again.
6. To stop recording, press the (STOP) button.
Reference
■ When using this camcorder as a recorder, the pictures that appear on a
monitor may seem uneven, however recorded pictures will not be affected.
■ Operations are not guaranteed for all of the recommended computer
environments mentioned above.
V .L IG H T D IS P L A Y P B Z O O M
IEEE 1394
●
■ CPU Intel ® Pentium III™ 450Mhz
■ Windows ® 98SE, ME, XP Mac OS 9.1~10.2
■ 64 MB RAM
■ IEEE1394 IEEE 1394
DV VP-D23i/D24i
1. PLAYER
2. DV
DV
/
DV DV /
■ DV IN
3. START/STOP /
REC PAUSE
■ PAUSE OSD
4. DV
5. START/STOP /
■ START/STOP /
6. STOP
■
■