Advanced recording, Using the video light, Video light – Samsung VP-D23i EN User Manual

Page 68: English

Advertising
background image

Advanced Recording

68

68

ENGLISH

✤ VIDEO LIGHT works in CAMERA/M.REC mode only.
✤ To brighten the scene when natural lighting is too dim.
✤ VIDEO LIGHT works in SP mode only.

-

If you turn on the LIGHT in LP mode, the LIGHT indicator and “LP”
will be blinking on the LCD.

DANGER

The VIDEO LIGHT can become extremely hot.
Do not touch it either while in operation or soon
after turning it off, otherwise serious injury may
result.

Do not place the camcorder into the carrying case
immediately after using the VIDEO LIGHT, since it
can remain extremely hot for some time.

Do not use near flammable or explosive materials.

It is recommended that you consult your nearest
SAMSUNG dealer for bulb replacement.
- The life of the bulb is approximately 50 hours.

1. Set the camcorder to the CAMERA mode.
2. Press the V.LIGHT button.

The VIDEO LIGHT indicator appears on the LCD and the light is
turned on.

3. If you want to turn off the VIDEO LIGHT, press the V.LIGHT button

again.

Reference

The light is turned off automatically during ejecting or inserting.

Even if the battery indicator does not blink when the battery packs charge
is low, the camcorder may turn off automatically when you turn on the
light, or when you start recording with light turned on.

The built-in light is used as a subsidiary light, it may not be enough for
outdoor lighting.

The picture quality may deteriorate if you use the VIDEO LIGHT
continuously for more than 20 minutes.

If you turn on the light in 1/6, 1/13, 1/25 SHUTTER mode, the manual
SHUTTER mode will be switched off.

Using the VIDEO LIGHT

V

.L

IG

H

T

D

IS

P

L

A

Y

P

B

Z

O

O

M

CAMERA

M.REC

VIDEO LIGHT


SP

VIDEO LIGHT

-

SP

LP

VIDEO LIGHT

VIDEO LIGHT

-

50

1.

CAMERA

2.

V.LIGHT

VIDEO LIGHT

3.

VIDEO LIGHT

V.LIGHT



20

VIDEO LIGHT

1/6 1/13 1/25

VIDEO LIGHT

Advertising