Sony STR-DE698 User Manual

Page 51

Advertising
background image

Op

era

tio

ns
Us

in

g

the

Re

mote

RM-AAP0

0

1

masterpage:Right

lename[D:\Sony SEM ju\DATA_STR-

DE698_Revision3\J9050212_2560571131DE698_UCA\2560571131\GB08REM_STR-DE698-
UCA.fm]

51

GB

model name1[STR-DE698]

[2-560-571-13(1)]

To cancel programming

Press RM SET UP during any step. The remote
automatically exits the programming mode.

To activate the input after
programming

Press the programmed button to activate the
input you want.

If programming is unsuccessful,
check the following:

• If the indicator does not light up in step 1, the

batteries are weak. Replace both batteries.

• If the indicator flashes 4 times in quick

succession while entering the numeric code,
an error has occurred. Start again from step 1.

Notes

• The indicator turns off while a valid button is

pressed.

• In step 2, if several input buttons are pressed, only the

last pressed button is valid.

• In step 2, if you press TV ?/1, only TV VOL +/– ,

TV CH +/–, TV/VIDEO and WIDE buttons are
reprogrammed.

• In step 3, if an input button is pressed, the new input

is selected and the programming procedure returns to
the beginning of step 3.

• For the numeric codes, only the first three numbers

entered are valid.

To clear the memory of the
remote

To clear all programmed, do the following to
reset the remote to factory settings.

Press

?/1

, AV

?/1

and MASTER VOL – at

the same time.

The indicator flashes 3 times, then goes off.

The numeric codes
corresponding to the component
and the maker of the component

Use the numeric codes in the tables below to
control non-Sony components and also Sony
components that the remote is normally unable
to control. Since the remote signal that a
component accepts differs depending on the
model and year of the component, more than one
numeric code may be assigned to a component.
If you fail to program your remote using one of
the codes, try using other codes.

Notes

• The numeric codes are based on the latest

information available for each brand. There is a
chance, however, that your component will not
respond to some or all of the codes.

• All of the input buttons on this remote may not be

available when used with your particular component.

To control a CD player

Maker

Code(s)

SONY

101, 102, 103

DENON

104, 123

JVC

105, 106, 107

KENWOOD

108, 109, 110

MAGNAVOX

111, 116

MARANTZ

116

ONKYO

112, 113, 114

PANASONIC

115

PHILIPS

116

PIONEER

117

TECHNICS

115, 118, 119

YAMAHA

120, 121, 122

continued

GB01COV_STR-DE698-UCA.book Page 51 Wednesday, February 23, 2005 10:14 AM

Advertising