Sony STR-DE698 - Manual (Page 29)

Ampl
ifier O
p
erati
o
n
masterpage:Right
lename[D:\Sony SEM ju\DATA_STR-
DE698_Revision3\J9050212_2560571131DE698_UCA\2560571131\GB04BSC_STR-DE698-
UCA.fm]
29 GB
model name1[STR-DE698]
[2-560-571-13(1)]
A SW: Lights up when sub woofer selection is
set to “YES” (page 19) and the audio signal is
output from the SUB WOOFER jack.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP A/SP B: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
D ; DIGITAL EX: “; DIGITAL” lights up
when the receiver is decoding signals recorded
in the Dolby Digital format.
“; DIGITAL EX” lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
E ; PRO LOGIC IIx: “; PRO LOGIC”
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. “; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated. However, these
indicators do not light up if both the center and
surround speakers are set to “NO” and you
select a sound field using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding does not function
for DTS format signals or for signals with a
sampling frequency of more than 48 kHz.
F DTS-ES 96/24: “DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 37).
G NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 24–28 for tuner operations.
Note
“RDS” appears for models of area code CEL,
CEK only.
I EQ: Lights up when the equalizer is activated.
J D.RANGE: Lights up when dynamic range
compression is activated (page 38).
K COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
L OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
M SLEEP: Lights up when sleep timer is
activated.
About the indications in the display
MEMORY
L C R
SL S SR
SBR SBL SB
SW LFE SP A
SP B RDS
STEREO MONO D.RANGE EQ
NEO:6
SLEEP OPT COAX 96/24
DIGITAL EX ; DTS-ES ; PRO LOGIC IIx
q; 8 9 qd
qf
qa qs
2 1 4 3 5 6 7
continued
GB01COV_STR-DE698-UCA.book Page 29 Wednesday, February 23, 2005 10:14 AM