Sony SNC-RZ25P - Manual (Page 11)

Pre
par
at
ion
Accessing the Camera Using the Web Browser
11
12
To access the camera directly, double-click the
camera name on the list.
Tip
The factory setting of the camera network is as
follows.
IP address:
192.168.0.100
Subnet mask: 255.0.0.0
Wireless LAN setting
Type:
Adhoc
SSID: snc-rz25
Channel: 11 ch
WEP:
Nothing
The welcome page of the network camera is
displayed in the Web browser.
Note
If the IP address is not set correctly, the welcome page
does not appear after step 12. In this case, try to set the
IP address again.
Accessing the Camera
Using the Web Browser
When the IP address has been assigned to the camera,
check that you can actually access the camera using the
Web browser installed in your computer.
Use Internet Explorer as the Web browser.
1
Start the Web browser on the computer and type the
IP address of the camera in the URL box.
The welcome page of the network camera is
displayed in the Web browser.
2
Click Enter.
The main viewer is displayed.
When the main viewer is correctly displayed, the IP
address assignment is completed.