Sony SNC-RZ25P - Manual (Page 32)

A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the System — System setting menu
32
Maximum wait number
Sets the number of users who can wait for their turn for
control authority during operation by one user.
Selectable number is from 0 to 10. This is effective when
“Exclusive control mode” is On.
Notes
• To use Exclusive control mode, the date and time of
the camera and the connected computer must be set
correctly at first.
• To use Exclusive control mode, do not disable the
Web browser Cookie. When it is disabled, this mode
cannot be used.
• When you change the Exclusive control mode
setting, click Refresh on the Web browser to reflect
the change when opening the main viewer page.
PTZ mode
Select the pan/tilt control mode using the 8-direction
arrow buttons (page 19) and the zoom control mode
using the TELE/WIDE button (page 19).
Select Normal or Step.
Normal: When you click the mouse button, the camera
starts panning, tilting or zooming operation, and the
operation continues while you hold down the
mouse button. To stop the operation, release the
mouse button.
Step: Each time you click the mouse button, the camera
moves (panning, tilting or zooming). If you keep the
mouse button held down for more than 1 second, the
operation mode is temporarily changed to Normal.
When you release the mouse button, the camera
operation stops and the Step mode is restored.
When you select Step, Pan/Tilt level and Zoom level
are selectable.
Pan/Tilt level: Select the camera transition level from 1
to 10 by clicking the 8-direction arrow button once
for panning/tilting. Selecting 10 provides the
maximum transition level.
Zoom level: Select the camera transition level from 1 to
10 by clicking or once for zooming.
Selecting 10 provides the maximum transition level.
OK/Cancel
See “Buttons common to every setting menu” on page
29.
Date & time Tab
Current date & time
Displays the date and time set on the camera.
Note
After you have purchased the camera, be sure to check
the date and time of the camera and set them if
necessary.
PC clock
Displays the date and time set on your computer.
Date & time format
Select the format of date and time to be displayed on the
main viewer from the drop-down list.
You can select from among yyyy-mm-dd hh:mm:ss
(year-month-day hour:minute:second), mm-dd-yyyy
hh:mm:ss (month-day-year hour:minute:second), and
dd-mm-yyyy hh:mm:ss (day-month-year
hour:minute:second).
Adjust
Select to set the day and time.
Keep current setting: Select if you do not need to set
the date and time.
Synchronize with PC: Select if synchronizing the
camera’s date and time with those of the computer.
Manual setting: Select if you want to set the camera’s
date and time manually.
Select the lower 2-digits of year, month, date, hour,
minutes and seconds from each drop-down list.
Synchronize with NTP: Select if synchronizing the
camera’s date and time with those of the time sever
called NTP server (Network Time Protocol). Set the
NTP server name and the Interval.
NTP server name
Type the host name or IP address of the NTP server, up
to 64 characters.