Samsung Z400 - Manual (Page 19)

Setting Up
Ser
vice
Section 1A. Setting Up Service 3
Ⅲ Insert the battery cover tabs into the
corresponding slots (3) and press down on the
cover (4) until you hear a click.
2. Press to turn the phone on.
Ⅲ If your phone is activated, it will turn on, search for
Sprint service, and enter standby mode.
Ⅲ If your phone is not yet activated, see “Activating
Your Phone” on page 3 for more information.
3. Make your first call.
Ⅲ Use your keypad to enter a phone number.
Ⅲ Press .
Activating Your Phone
There are three basic scenarios for activating your new
phone:
A. You purchased your phone at a Sprint Store. It is probably
activated and ready to use.
B. You received your phone in the mail, and it is a new Sprint
account or a new phone number.
Your phone is designed
to activate automatically when you first turn it on. To
confirm your activation, make a phone call.


Note Your phone’s battery should have enough charge for
your phone to turn on and find a signal, set up your
voicemail, and make a call. You should fully charge
your battery as soon as possible. See “Charging the
Battery” on page 22 for details.
Z400.book Page 3 Monday, April 7, 2008 8:06 PM