Samsung Z400 - Manual (Page 64)

48 Section 2B. Nextel Direct Connect
To reply to a Call Alert:
1. With the Call Alert displayed, press and hold the
Direct Connect button to return the call.
2. Continue with the Direct Connect call as previously
detailed.
To dismiss a Call Alert:
ᮣ Press Ignore (right softkey).
Setting Direct Connect Permissions
With Direct Connect, you can control which numbers
can reach your phone using Direct Connect.
1. Press Menu > Settings > Direct Connect > Permissions .
2. Select Accept all DC calls, except those from numbers I
block and press to block incoming Direct
Connect calls from selected numbers.
● Add numbers to the blocked call list by
re-activating the DC Permissions menu.
● Select Block Another # , press , and then
choose one of the following options: Contacts ,
Recent DCs , or New Number . Follow the
onscreen instructions.
– or –
Select Reject all DC calls, except those from numbers
I allow and press to reject all but selected
incoming Direct Connect calls.
● Add numbers to the allowed call list by
re-activating the DC Permissions menu.
Note Preset text messages with Call Alert are available only
on Nextel Direct Connect capable Sprint phones and
can be received only by other subscribers with
capable Sprint phones. If you send a Call Alert with
text to another Direct Connect subscriber without
this capability, they will receive the Call Alert but will
not receive the text message.
There is no additional charge to send preset text
messages with Call Alerts.
Note When sending a Call Alert, you may see an option to
send an SMS Voice or SMS Text message. These
can only be sent to 10-digit phone numbers and may
incur additional charges depending on your service
plan.
Z400.book Page 48 Monday, April 7, 2008 8:06 PM