Samsung SVR-440 - Manual (Page 53)

53
4.8.2 SENSOR TYPE
Inputs detected and transferred from external sensors are identified as events. Select the switch type
of a sensor connected to each channel.
- N/O : NORMAL OPEN Type Sensor
- N/C : NORMAL CLOSE Type Sensor
- OFF
4.9 PTZ SETUP
Press the MENU button and select the Tab using the Left/Right button. Then, the submenu related to
PTZ appears as illustrated below. Press button and select the submenu using the Left/Right
button. Next, press button again, and you can select setup items using the Up/Down button
4.9.1 Setup by Channel
Assigns the camera ID by channel and set the camera model.
. PTZ Camera IP(0~255) : User can designate each camera ID from 0 to 255.
. Model (SPD/PELCO) : selects the maker of a connected camera. The signals from each camera