Samsung SVR-440 - Manual (Page 54)

54
vary by manufacturer. It is necessary to set the signals accurately by model.
- Available Models
Samsung : SPD(SPD-1600, SPD-2200, SPD-2500)
PELCO(D) : PELCO ‘D’ Speed Dome using Protocol
SRX : SRX-100B, DONGYANG, WON WOO, CANON, DYNACOLOR, SONY etc.
4.10 EXIT MENU
Press the ESC button to close the menu after setup. Then, the confirm box appears. Select YES and
the setting values are saved.
4.11 ETC
4.11.1 Firmware Upgrade
User can upgrade the software using the firmware download. You can download the firmware
with USB Memory stick.
Turn the power off. ①
Press ESC button on the front panel. Hold it and turn the power on. (Press ESC button and ②
hold it until initial massage is displayed on the screen)
Select YES to enter into the Test mode. Input password if the password protection ③ is working.