Samsung SVR-440 - Manual (Page 66)

66
Chapter 6 Network Viewer Program
Operates the unit or changes setting values on a remote PC by using the Network Viewer Program.
This chapter describes the installation and operations of Network Viewer Program.
This manual assumes that users are familiar with basic knowledge of the operation of O/S
and computers.
6.1 Network Viewer Program Installation
6.1.1 System Requirement
- Pentium IV 1.2GHz or over
- O/S: Microsoft Windows 2000/XP or over
- RAM: 256MB or over (recommend 512MB or over)
- Video Card: Super VGA 16M or over
- LAN Card: 10/100 base-T Network Card
6.1.2 Network Environment
Classification Client PC DVR
Min.
Recommended
1Mbps or over
2Mbps or over
0.5Mbps or over
2Mbps or over
- The image transfer rate depends on the number of Client PCs connected to the unit.
- The Network Viewer Program is compatible with Microsoft Windows 2000/XP.
6.1.3 Program Installation
① Turn on the Client PC where Windows 2000 or Windows XP is installed.
② Insert the exclusive program that comes with the unit in your CD–ROM drive or download the
Network Viewer Program (in SUPPORT – DOWNLOAD – CCTV) from our website
(http://www.samsungtechwin.co.kr).
③ Copy the Setup.exe file on the desktop of My Computer.
④ Double-click the Setup.exe file, the automatically executable compressed file, and decompress
the file into the desired directory.
⑤ mfc42.dll, SvrManger.exe, DllWrsFtpCtrl.dll is decompressed in the desired directory.