Sony PCS-TL33 - Manual (Page 78)

78
Preparing for an Encrypted Videoconference via LAN
C
h
ap
te
r 6
E
n
c
ry
p
ted
V
ideoc
onf
e
renc
e v
ia LA
N
Encryption priority
Connects only to remote parties with standard
encrypted connection enabled.
Using proprietary encryption
1
Select “Proprietary” for “Encryption Protocol” under
Page 3/3 of the Communication Mode menu.
2
Enter the password (13 to 20 alphanumeric
characters).
For details on settings, see “Communication Mode
Menu” on page 29.
• When the “Encryption Protocol” is set to “Standard”, no
password is necessary.
• If you set “Encryption via LAN” to “On” with
encryption given priority, you cannot connect to a
terminal that is not equipped with the encryption feature,
to a terminal with “Encryption via LAN” set to “Off”, or
to a terminal without the same password as that of your
system.
Connect with encryption
Connect without encryption
Standard encryption
connection available Standard encryption
connection available
Standard encryption
connection available Standard encryption
connection unavailable
Connect with encryption
No connection
Standard encryption
connection available Standard encryption
connection available
Standard encryption
connection available Standard encryption
connection unavailable
Proprietary
Connection
3/3 Communication
Right-click the mouse to display a help message.
Cancel OK
On Encryption via LAN
Encryption Protocol
Connectivity Prioritization
Encryption Password
Off
IP:012.345.678.912
Notes