Sony CHC-TB10 - Manual (Page 11)

11 GB
CD/Tuner
4
Press TUNER MEMORY/DIRECTION (or
press TUNER MEMORY on the remote).
5
Slide the knob to – or to + (or press
PRESET – or + on the remote)
repeatedly to select the desired preset
number.
Preset number
6
Press ENTER.
The station is stored.
7
Repeat steps 1 to 6 to store other
stations.
Tip
To stop scanning, press x.
continued
Tuner
Presetting radio stations
You can preset up to 20 FM stations and 10
AM stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
There are two ways to store the station presets.
To Method
Automatic Tuning Preset Automatically tune
all of the stations that
can be received in
your area and then store
them manually
Manual Tuning Preset
Manually tune and store
the radio frequency of
your favourite stations
Setting presets through
automatic tuning
1
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2
Press PLAY MODE/TUNING MODE
repeatedly until “AUTO” appears.
When you use the remote in step 3, skip this
procedure.
3
Slide the knob to – or to + (or press and
hold TUNING –/+ on the remote).
The frequency indication changes and the
scanning stops when the system tunes in a
station. “TUNED” and “STEREO” (for a
stereo program) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in step 2 through 7 of
“Setting presets through manual tuning” on
page 12.