Sony CHC-TB10 - Manual (Page 21)

21 GB
Timer/Display
Display
Turning off the display
— Power Saving Mode
The demonstration display (display window
lighting even when the system power is off)
and the clock display can be turned off to
minimize the amount of power consumed
during standby (Power Saving Mode).
Press DISPLAY repeatedly while the
system is off until the demonstration
display or the clock display disappears.
To cancel the Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
cyclically as follows:
Demonstration display t Clock display* t
No display (Power Saving Mode)
* “--:--” is displayed if you do not set the clock.
Tips
• ?/1 indicator lights up even in the Power Saving
Mode.
• The timer continues to operate in Power Saving
Mode.
8
Press ENTER.
The start time, the stop time, and the sound
source appear in turn, then the original
display returns.
9
Press ?/1 to turn off the system.
To Do this
Activate/check the
setting Press CLOCK/TIMER
SELECT on the remote, then
press . or > on the
remote until “DAILY”
appears. Then, press ENTER.
Change the setting Start over from step 1.
Cancel the timer
Press CLOCK/TIMER
SELECT on the remote then
press . or > on the
remote until “OFF” appears.
Then, press ENTER.
Notes
• If the system is on about 15 seconds before the
preset time, the Daily Timer will not be activated.
• The system automatically turns on about 15 seconds
before the preset time. Do not operate the system
until the play starts.
• You cannot activate the Daily Timer and the
recording timer at the same time.
• The radio station you last tune in will be selected
for the radio Daily Timer.