Attaching the speaker pads, Inserting two r6 (size aa) batteries, Into the remote – Sony CHC-TB10 User Manual
Page 7
7
GB
Getting Started
Extend the FM lead antenna
horizontally
3
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
VOLTAGE SELECTOR
230-
240V
220V
120V
4
Connect the power cord to a wall outlet.
The demonstration appears in the display.
If the plug of the power cord does not fit
your wall outlet, attach the supplied adapter
on to the plug (for models with a plug
adapter). To turn on the system, press ?/1.
When carrying this system
Perform the following procedure to protect
the CD mechanism.
1
Make sure that the disc is removed from
the system.
2
Press
?/1
while holding down CD
u
until “STANDBY” appears.
When you release the buttons, “LOCK”
appears.
3
Unplug the power cord.
Inserting two R6 (size AA)
batteries into the remote
E
e
e
E
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Attaching the speaker
pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
Jack type B
AM loop antenna