Sharp AR-163 User Manual

Page 31

Advertising
background image

29

ST
A

TUS

INDICA

T

ORS

Toner cartridge replacement

TONER CARTRIDGE REPLACEMENT

5

Gently insert the toner cartridge along the guides until
it locks in place while pushing the lock release lever.

If dirt or dust is adhered to the toner cartridge, remove
it before installing the cartridge.

6

Pull out the shutter and remove it from the toner cartridge
as shown in the illustration.

7

Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover. The

indicator will go out and the

START key (

) indicator will light up.

When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.

Toner cartridge life

To find out the approximate quantity of toner remaining, follow the procedure
below.

1

Press and hold the light (

) key for more than 5

seconds until all the alarm indicators (

,

,

,

,

and

) blink and – – ” appears in the copy quantity

display.

2

Press and hold the copy ratio display (

) key for more

than 5 seconds.

The approximate quantity of toner remaining will be indicated as a
percent in the copy quantity display. If “LO” is displayed, the toner
is down to less than 10%.

3

Press the light (

) key.

All the alarm indicators will go out.

Advertising
This manual is related to the following products: