Sharp AR-163 - Manual (Page 63)

61
OPTIONAL EQ
UIPMENT
4 in 1 copying
2 in 1 copying
The 2 in 1 or 4 in 1 feature is used to copy 2 or 4 originals, collectively in a specified
order, onto one sheet.
To use these features, an optional SPF (AR-SP2) is needed.
● These features cannot be used with the dual page copying, XY zoom, erase, or
margin shift features.
● Copies can be made with or without the border lines shown in the illustration. See
user program No.6 on page 35.
● The order of originals which will be arranged on the copies can be selected by
user programs. There are two patterns of layout for 2 in 1 copying and four
patterns of layout for 4 in 1 copying. See user program No.17 and No.18 on page
35.
● The 2 in 1 or 4 in 1 feature operates only in the sort or group mode. If the 2 in 1
or 4 in 1 feature is selected when either the sort or group mode has not been
selected, the group mode will be automatically selected.
2 in 1 or 4 in 1
1 Set the originals face up in the document feeder tray.
● The original table cannot be used for the 2 in 1 or 4 in 1 feature.
2 Use the TRAY SELECT ( ) key to select the paper tray
with the desired paper size.
● The bypass tray and any tray with non-standard size paper cannot be
used with the 2 in 1 or 4 in 1 feature.
3 To confirm or set the layout pattern for 2 in 1 copying,
first ensure that both the 2 IN 1 (
) and 4 IN 1
( ) indicators are not lit then press and hold the 2 IN
1 / 4 IN 1 ( / ) key for more than 5 seconds.
● The 2 IN 1 ( ) indicator will blink and the currently selected
layout pattern number will blink in the copy quantity display.
To confirm or set the layout pattern for 4 in 1 copying,
use the 2 IN 1 / 4 IN 1 (
/ ) key to light the 2
IN 1 ( ) indicator then press and hold the 2 IN 1 / 4
IN 1 ( / ) key for more than 5 seconds.
● The 4 IN 1 ( ) indicator will blink and the currently selected
layout pattern number will blink in the copy quantity display.
ELECTRONIC SORTING KIT (AR-EB3)
Electronic sorting kit (AR-EB3)