Sharp AR-163 - Manual (Page 59)

57
OPTIONAL EQ
UIPMENT
SINGLE PASS FEEDER (AR-SP2)
Misfeed removal
Location A
Location B
Location C
Single pass feeder (AR-SP2)
If an original misfeed occurs in the SPF, the copier will
stop and the red indicator which indicates an original
misfeed will blink.
1 Open the left feeding roller cover and pull the original
gently to the left and out from the document feeder tray.
Close the left feeding roller cover.
2 If the misfed original cannot be removed in step 1, open
the right feeding roller cover and remove the misfed
original. Close the right feeding roller cover.
3 If the misfed original cannot be removed in steps 1 and
2, remove the misfed original from the exit area. Open
the document feeder cover and rotate the roller in the
direction indicated by the arrow if needed.
If the misfed original cannot be easily removed from the
exit area, open the front part of the document feeder tray
to remove the original.
4 Open and close the document feeder cover to cancel the
misfeed location indicator.
After misfed originals are removed, a number may
appear in the copy quantity display, indicating the
number of originals that must be returned to the
document feeder tray. Return the originals and press
the START (
) key to resume copying.
A
C
B
Left feeding roller cover
Right feeding roller cover
Roller