Adjusting the delay between the picture and sound, A/v sync), Changing the brightness of the front panel display – Sony RHTG2000 User Manual
Page 16: Dimmer), Adjusting the delay between the picture and, Sound (a/v sync), Changing the brightness of the front panel, Display (dimmer)
16
US
If picture and sound are not synchronized, you can adjust the
delay between picture and sound.
1
Press AMP MENU.
2
Press
x/X
repeatedly until “CUSTOMIZE” appears,
then press ENTER or
c.
3
Press
X/x repeatedly until “A/V SYNC” appears,
then press ENTER or
c.
4
Press
X/x to select the setting.
• SYNC OFF: does not adjust.
• SYNC ON: adjusts the difference between picture and
sound.
5
Press ENTER or AMP MENU.
The AMP menu turns off.
• Depending on the input stream, this function may not be effective.
The brightness of the front panel display can be set to one of
2 levels.
1
Press AMP MENU.
2
Press
x/X
repeatedly until “CUSTOMIZE” appears,
then press ENTER or
c.
3
Press
X/x repeatedly until “DIMMER” appears,
then press ENTER or
c.
4
Press
X/x to select the brightness of the front
panel display.
• DIMMER OFF: bright lighting.
• DIMMER ON: low lighting. Turns off the lighting
when the power is off.
5
Press ENTER or AMP MENU.
The AMP menu turns off.
Adjusting the Delay Between the
Picture and Sound
(A/V SYNC)
Note
H
X
M
m
.
>
-
ENTER
CLEAR
x
O
AMP MENU
X/x/c
ENTER
Changing the Brightness of the
Front Panel Display
(DIMMER)
H
X
M
m
.
>
-
ENTER
CLEAR
x
O
AMP MENU
X/x/c
ENTER