Setting up the surround speakers, Sp setup menu parameters, Level menu parameters – Sony RHTG2000 User Manual
Page 22
22
US
To obtain the best possible surround sound, set for the size of
the speakers you have connected and their distance from your
listening position.
Default settings are underlined.
1
Press AMP MENU.
2
Press
X/x repeatedly until “SP SETUP” or
“LEVEL” appears, then press ENTER or
c.
3
Select an item using
X/x, then press ENTER or c.
4
Select a setting using
X/x, then press ENTER.
The setting is selected and setup is complete.
SP SETUP menu parameters
x SURR SP (surround speakers)
x FRONT DIST (front speaker distance)
Default setting: 3.0 meters (10 ft)
You can set in 0.2 meter (1 ft) increments from 1.0 to 7.0
meters (4 to 23 ft).
x SURR DIST (surround speaker distance)
Default setting: 3.0 meters (10 ft)
You can set in 0.2 meter (1 ft) increments from 0.0 to 7.0
meters (0 to 23 ft).
• The value you can set for SURR DIST differs depending on the
value you have set for FRONT DIST.
LEVEL menu parameters
You can adjust the level of the speakers. Use the test tone for
easy adjustment (see “To set the speaker level by using the
test tone” on page 23).
x TEST TONE
x FL LEVEL (front left speaker level)
Default setting: 0 dB
You can set in 1 dB increments from -6 dB to 0 dB.
x CEN LEVEL (center speaker level)
Default setting: 0 dB
You can set in 1 dB increments from -6 dB to +6 dB.
x FR LEVEL (front right speaker level)
Default setting: 0 dB
You can set in 1 dB increments from -6 dB to 0 dB.
x SR LEVEL (surround right speaker level)
Default setting: 0 dB
You can set in 1 dB increments from -6 dB to +6 dB.
x SL LEVEL (surround left speaker level)
Default setting: 0 dB
You can set in 1 dB increments from -6 dB to +6 dB.
x SW LEVEL (subwoofer level)
Default setting: 0 dB
You can set in 1 dB increments from -6 dB to +6 dB.
Setting up the surround speakers
[SURR YES]
Select this if surround speakers are connected.
[SURR NO]
Select this if no surround speakers are connected.
Note
H
X
M
m
.
>
-
ENTER
CLEAR
x
O
AMP MENU
X/x/c
ENTER
[T.TONE OFF]
Emits no test tone.
[T.TONE ON]
Emits test tone from the speakers in turn.