SmartBridges sB3010 - Manual (Page 28)

Page 28 of 82
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul™ Nexus User Guide
2.6.2 Wireless Configurations
The wireless parameters need to be configured for the Root Bridge device to communicate with other
airHaul Remotes.
Follow the steps below to change the Root Bridge Wireless Configurations:
1. From the Summary Information page, click on the Wireless Configuration link.
2. The Radio Configuration page will appear, click on the Wireless Settings link.
3. Enter the SSID of the unit and select the channel.
4. Enter the remote unit radio’s MAC address in the security menu and designate it as a Bridge
or Router. The Client Authorization MAC setting is an ACL and it allows the root device to
filter client MAC for association.
Note: For more information on the security settings, please look at section 2.9.2
5. Select the Transmit power of the radio from Dial-in-Power drop down menu.
6. Select the gain of the antenna from the drop down menu as per the gain of the antenna being
used with the equipment.
7. Enter the RF cable loss based on the cable specifications.
8. Click on the Apply Changes button to change the settings.
Figure 2-15 Root Bridge Wireless Settings