Sony SU-W100 - Manual (Page 7)

7
Step 5: Connect the cables to the TV
Before securing the TV to the wall, connect the
cables to the TV.
You can arrange the cables by passing them
along the sides of bracket B.
Note
Do not replace the rear cover of the TV for the moment.
Step 6: Secure the TV to the wall
1 Hook bracket B on bracket A.
Notes
• Secure the TV to the wall without the rear cover.
• Hold the TV firmly. Be especially careful when you secure the TV in a high place.
2 Align the screw holes on
bracket B with those on
bracket A, and fully tighten
the supplied two screws
using a coin or similar.
Note
To prevent the TV being dropped, hold
the TV firmly as illustrated and tighten
the screws.
Bracket B
Bracket A
Wall
Bracket B Bracket A
Bottom view
Wall
Bracket A
Two screws
(supplied)
continued