Samson UT-5 - Manual (Page 10)

8
Guided Tour - UR-5/UR-5D
Rear Panel
1: AC input - Connect the supplied standard 3-pin “EEC” plug here.
The UR-5 and UR-5D both contain automatic current and voltage
sensing circuitry and so can accept any mains current from 100 - 250
volts without the need to set a selector switch.
2: Balanced output* - Use this electronically balanced low impedance
(600 Ohm) XLR jack when connecting the UR-5 or UR-5D to profession-
al (+4) audio equipment. Pin wiring is as follows:
* If required, both the balanced and unbalanced outputs can be used
simultaneously.
SAMSON
SAMSON TECHNOLOGIES CORP.
HICKSVILLE, NEW YORK, U.S.A.
UHF SYNTHESIZED DIVERSITY RECEIVER 120V~ 50 / 60Hz 11W POWER
RATING
UNBALANCED
OUTPUT
-10dBv.5K
Ω
MODEL No.UR-5 AC INPUT
( 120V-240V VOLTAGE SENSING)
BALANCED
OUTPUT
-10dBm.600
Ω
1 2 3 5 5
3 - SIGNAL
2 + SIGNAL
1 GROUND +