Sony DVP-CX995V - Manual (Page 28)

28
12
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 (
through ).
• D-PCM (page 82)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 82)
13
Press ENTER.
“DTS” is selected.
14
Press X/x to select the type of DTS
signal sent to your amplifier
(receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 (
through ).
• D-PCM (page 82)
• DTS (only if the amplifier (receiver)
has a DTS decoder) (page 82)
15
Press ENTER.
◆ When “DIGITAL OUTPUT” is selected
in step 11
• Quick Setup is finished and
connections are complete.
◆ When “DIGITAL & 5.1CH OUTPUT” is
selected in step 11
• The Setup Display for “SPEAKER
SETUP” appears.
16
Press X/x to select the size of the
center speaker.
If no center speaker is connected, select
“NONE” (page 83).
17
Press ENTER.
“REAR” is selected.
18
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
“NONE.”
B D
AUDIO SETUP
AUDIO ATT:
AUDIO FILTER:
DOLBY DIGITAL:
DTS:
OFF
SHARP
DOWNMIX: DOLBY SURROUND
D-PCM
DIGITAL OUT: ON
D-PCM
DOLBY DIGITAL
AUDIO(HDMI):
48kHz/96kHz PCM:
AUTO
B-2 C-2
D-2 D-3
AUDIO SETUP
AUDIO ATT:
AUDIO FILTER:
DOLBY DIGITAL:
DTS:
OFF
SHARP
DOWNMIX: DOLBY SURROUND
D-PCM
DIGITAL OUT: ON
D-PCM
D-PCM
AUDIO(HDMI):
48kHz/96kHz PCM:
DTS
B D
B-2 C-2
D-2 D-3
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF TEST TONE:
FRONT:
CENTER:
NONE
SMALL
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then .
T
i
ENTER
LARGE
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF TEST TONE:
FRONT:
CENTER: LARGE
REAR:
SUBWOOFER: LARGE
LARGE
SMALL
LARGE
NONE