Sony DVP-CX995V - Manual (Page 29)

29
H
o
o
kups
19
Press ENTER.
“SUBWOOFER” is selected.
20
Press X/x to select whether or not
you have connected a subwoofer.
21
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 (
through ). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
See page 76 for using the Setup Display.
Audio connection (pages 21 to 24)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 81).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 81).
• Set “DIGITAL OUT” to “ON” (page 81).
• Set “DISTANCE” and “LEVEL” according
to the connected speakers (page 84).
z Hints
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON”
(page 81).
• For connections
Set “48 kHz/96 kHz PCM” to “96 kHZ/24 bit”
only if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 82).
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then .
To quit press
ENTER ENTER
SETUP DISPLAY DISPLAY
YES
YES
NONE
LARGE
B D
A
B-1 C-1
B-2 C-2 D-2 D-3
D-1
B-1 C-1 D-1
B-2 C-2 D-2 D-3