Siemens SIMATIC TIWAY 1 - Manual (Page 142)

HOST COMMAND SET REFERENCE
UNILINK HOST ADAPTER 5–57
USER MANUAL
5.6.2 Report Network Manager Configuration — 31
The REPORT NETWORK MANAGER CONFIGURATION command returns
the values for all the options specified in the CONFIGURE NETWORK
MANAGER command, including default values.
Command: 31
Response: 31 dddddddd ff [oo vvvv]
Usage: PERFORMANCE
Modes: NM
Parameters:
dddd The current values for Dipswitch 1 and Dipswitch 2 in the most
significant word and least significant word respectively. The
position values are right-justified in each word as shown in
Figure 5–10. A bit set to one indicates the corresponding switch is
up (off).
1 2 3 4 5 6 7 8 9 10
U
P
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
MSB LSB
1 2 3 4 5 6 7 8 9 10
U
P
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
MSB LSB
WORD #1 WORD #2
Dipswitch 1 Dipswitch 2
Figure 5–10 Dipswitch Values Bit Map
ff A flag indicating whether the CONFIGURE NETWORK
MANAGER command has been processed when set to one. In
multiprocessing environments, the tasks can check the value of
this flag to determine if they can issue commands.
oo The option number ranging from 01 to 0E.
vvvv The values for the parameters described in the CONFIGURE
ADAPTER command.