Sony D-E880 - Manual (Page 16)

16
Connecting a stereo
system
You can listen to CDs through a stereo
system and record CDs on a cassette tape and
a MiniDisc. For details, see the instruction
manual that comes with the connected
device.
Be sure to turn off all connected devices
before making connections.
Stereo system,
cassette recorder,
radio cassette
recorder, etc.
to LINE OUT
(OPTICAL)
Connecting
cord
Left (white)
Right (red)
B Connecting your CD player
MiniDisc
recorder, DAT
deck, etc.
Optical
digital
connecting
cord
SOUND
No
Yes*
G-PROTECTION
No
No
Notes
• Before you play a CD, turn down the volume of
the connected device to avoid damaging the
connected speakers.
• Use the AC power adaptor for recording. If you
use the rechargeable batteries or dry batteries as a
power source, batteries may become completely
depleted during recording.
• Adjust the volume properly on the connected
device so that the sound will not be distorted.
When using the connecting cord
• You cannot adjust the volume of the
headphones/earphones on the CD player or
the remote control.
• If the sound is distorted, connect the device
to the i/REMOTE jack.
When using the optical digital
connecting cord
To record a CD on a MiniDisc, DAT, etc.,
make sure that the CD player is in pause
before operating the recording procedures.
About the G-PROTECTION and
SOUND functions when using the
connecting cord or optical digital
connecting cord
See the following table for valid functions
according to the types of connecting cord:
Connecting cord
Optical digital
connecting cord
* Functions only on the output sound from the
i /REMOTE jack; does not function on the
output sound from the LINE OUT (OPTICAL)
jack.