Sony NWZ-X1050 - Manual (Page 12)

NWZ-X1050 / X1051 / X1060 / X1061 GB.4-137-988-11(1)
22
NWZ-X1050 / X1051 / X1060 / X1061 GB.4-137-988-11(1)
2
Transferring Music Using Windows Media Player 11
You can use Windows Media Player 11 to transfer music from your computer to the player.
Please follow these instructions to transfer songs from your computer to the player.
1
Start up Windows Media Player 11, and then connect the player to your
computer using the supplied USB cable.
Insert the connector of the USB cable into the player with the mark facing up.
The “Device Setup” window appears.
2
Click “Cancel.”
Close the auto play window if it appears by clicking “Cancel” or the Close icon.
 If you click “Finish” instead of “Cancel,” the entire library data of Windows Media
Player is automatically copied to the player. If the library data size is larger than the
available storage space of the player, the copy process does not start.
 You can open the “Device Setup” window at any time. To open it, right-click
“WALKMAN” on the left side of the Windows Media Player window, and then click
“Set Up Sync.”

Click the “Sync” tab on the Windows Media Player 11 window.

Drag and drop the desired songs to the Sync List on the right side of the
window.
The songs are added to the Sync List.

Click “Start Sync” to start synchronization.
When synchronization is complete, “You can now disconnect ‘WALKMAN_name’.”
appears on the Sync List. After completion, close Windows Media Player 11 and
disconnect the player from the computer.
For details, refer to Windows Media Player 11 Help Transferring Music/Videos/Photos/Podcasts from a Computer (continued)