Sony DVP-FX720 - Manual (Page 21)

21
Playing Discs
Notes
• If the disc is inserted with playback side up,
a “No Disc” or “Cannot play this disc.”
message appears.
• Discs created on DVD recorders must be
correctly finalized to play on this player. For
more information about finalizing, refer to
the operating instructions supplied with the
DVD recorder.
• The disc may be still spinning when the disc
lid is opened. Wait until the spinning stops
before removing the disc.
• During operation, “ ” may appear on the
screen. This symbol indicates that a function
explained in this operating instruction is not
available on the current DVD VIDEO.
• Some DVD-RWs/DVD-Rs (VR mode) may
take time before starting playback because
of the recorded content.
To stop playback
Press x.
Pressing H again will start playback
from the point you stopped (Resume
Play). See page 22 for details.
To play from the beginning, press x
twice, then press H.
To turn off the power
Press the remote’s \/1 button or slide
the player’s \/1/HOLD switch to “\/1.”
To avoid accidental button operation
on the player
Set the player’s \/1/HOLD switch to
“HOLD.” All the buttons on the player
are locked, while the button on the
remote remains operable.
To play DTS sound tracks on a DVD
VIDEO
• The player’s speaker does not output DTS
sound. When you play DTS sound tracks on
a DVD VIDEO, connect the player to an AV
amplifier (receiver) (page 49) and set up
“DTS” in “Audio Setup” (page 44).
• If you connect the player to audio
equipment such as an AV amplifier
(receiver) without a DTS decoder, do not set
“DTS” to “On” in “Audio Setup” (page 44).
A loud noise may come out from the
speakers, which may affect your ears or
cause speaker damage.
Notes
• A screen saver image appears when you
leave the player in pause or stop without
operation for more than 15 minutes. The
image disappears when you press H. See
page 42 for details.
• The player turns off, 15 minutes after
starting the screen saver function (Auto
Power Off).
,continued