Sony DVP-FX720 - Manual (Page 49)

49
Ho
okup
s
Connecting to an AV amplifier (receiver)
Example 1
To send the playback signal to an AV amplifier (receiver)
1
Set the LINE SELECT switch on the player’s right side to “OUT.”
* The yellow plug is used for video signals (page 48).
Example 2
To send the playback signal to an AV amplifier (receiver)
1
Set the LINE SELECT switch on the player’s right side to “OUT.”
2
Set “Digital Output” to “On” in “Audio Setup” (page 43).
Stereo amplifier
To AUDIO
Audio/video cord (supplied)
To AUDIO input
Amplifier with Dolby Digital
or DTS decoder
To OPTICAL OUT
Optical digital cord (not supplied)
To AUDIO input
,continued