Connecting to another device, Connecting to tv monitor – Sony DVP-FX720 User Manual
Page 48
48
Hookups
Connecting to another device
To switch LINE SELECT (IN/OUT) switch
LINE SELECT IN:
Input images or audio from an exterior device. The “Line in”
message will be displayed on the LCD screen until the signal
from the exterior device is received.
LINE SELECT OUT:Sends the playback signal from this player to a TV.
Notes
• Plug cords securely to prevent noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this player to a TV that does not have a video input jack.
• Be sure to disconnect the mains lead of each component before connecting.
• Connect the player to the TV directly. Image quality may suffer when the video output from the
player is passed through a video deck on to a TV.
Connecting to TV monitor
To send the playback signal to a TV or a monitor
1
Set the LINE SELECT switch on the player’s right side to “OUT.”
TV or monitor with audio/
video intput jacks
To AUDIO/VIDEO
Audio/video cord (supplied)