Sony DVP-FX720 - Manual (Page 24)

24
◆ When playing a DVD-VR mode
disc
The types of sound tracks recorded
on a disc are displayed.
Example:
• 1.Main (main sound)
• 1.Sub (sub sound)
• 1.Main+Sub (main and sub sound)
◆ When playing a CD/VIDEO CD
• Stereo: the standard stereo sound
• Left: the sound of the left channel
(monaural)
• Right: the sound of the right
channel (monaural)
◆ When playing a Super VCD
• Stereo: the stereo sound of the
audio track 1
• Left: the sound of the left channel
of the audio track 1 (monaural)
• Right: the sound of the right
channel of the audio track 1
(monaural)
• Stereo 1: the stereo sound of the
audio track 2
• Left 1: the sound of the left
channel of the audio track 2
(monaural)
• Right 1: the sound of the right
channel of the audio track 2
(monaural)
z Hints
• You can check of the current audio format
(Dolby Digital, DTS, PCM, etc.) by
pressing AUDIO repeatedly while playing a
DVD VIDEO.
• You can switch the sound in the Playback
Settings Display while playing a DVD
(page 27).
Notes
• Depending on the disc, you may not be able
to change the audio format, even if it is
recorded in multiple audio formats.
• When playing a Super VCD that does not
contain audio track 2, no sound will come
out if you select “Stereo 1,” “Left 1,” or
“Right 1.”
• When playing soundtracks on DVD-RW/
DVD-R (VR mode) with audio equipment
such as an AV amplifier (receiver)
connected via the OPTICAL OUT jack, set
“Dolby Digital” in “Audio Setup” to
“Downmix PCM” (page 43).
• If “DTS” in “Audio Setup” is set to “Off”
(page 44), the player does not output the
DTS signal from the OPTICAL OUT jack
even when the disc contains a DTS track.
• When playing DTS sound tracks on a CD,
you cannot change the sound.