Sony RM-AV2500T - Manual (Page 15)

15 GB
TV
CD MD
SAT VCR
TAPE
DVD
M1
CBL
M2
AMP
M3
PROGRAM
6
2
3
Using Non-Preset
Remote Control
Operations
— Learning Function
To operate non-preset components or
functions, use the following “learning”
procedure to “teach” any of the
programmable buttons and keys to
operate the functions of another remote
control. You can also use the learning
function to change the signal of
individual keys and buttons after setting
the component code number (page 8).
It is useful if you make a memo of the
learned key functions in the LCD touch
key display table (page 68).
Note
Some specific remote control signals may not
be learned.
Example: To programme the N
(Play) signal of your component
to the VCR N (Play) key of the
Commander
1
Place the RM-AV2500T head to
head with your component’s
remote control.
2
While pressing COMMANDER
OFF, press the Component Select
button for the component whose
signals are to be learned.
“LEARN” appears and all the
learnable keys flash.
about 2 – 4 inches
(5 – 10 cm) away
Remote control for
your component
RM-AV2500T
Display for CHANNEL, VOLUME, MUTING,
RECALL, MENU, OK, EXIT and cursor
buttons
Continued