Sony RM-AV2500T - Manual (Page 8)

8 GB
Basic Operations
Setting the Code for
Preset Audio and Visual
Components
The Commander is preset at the factory
to operate Sony brand AV components
(see the table below). If you are using the
Commander with a factory-set Sony
components, skip the following
procedures.
You can use the Commander with other
preset AV components also. To use with
other AV components, you need to follow
the procedures to set the correct codes for
each component.
* Analog audio compact cassette deck
Compo-
nent Select
Button
TV
SAT
VCR
DVD
CBL
AMP
CD
MD
TAPE
M1
M2
M3
Factory setting
Sony TV
Sony satellite
tuner
Sony VHS VCR
(VTR3)
Sony DVD
player
Sony amplifier
Sony CD player
Sony MD deck
Sony cassette
deck
Sony TV/Sony
VHS VCR
Sony TV/Sony
DVD player
Sony TV/Sony
satellite tuner
Preset
component(s)
TV
Satellite tuner
VCR
DVD player
Cable box
Amplifier
CD player
MD deck
Cassette deck*
TV/VCR
TV/DVD
TV/SAT
See “Table of Preset Functions” (page 59)
for the functions of keys and buttons as
for each component.
Setting a component code
Example: To set up a Philips TV
1
See the tables in the supplied
“Component Code Numbers,”
and find the four-digit code
number for the desired
component.
If more than one code number is
listed, use the number that is listed
first.
For example, to set up a Philips TV,
you would use the code number 8086.
The first digit of the component code
number means the component
category (TV, VCR, etc.). For further
details, see the tables in the supplied
“Component Code Numbers.”
TV
CD MD
SAT VCR
TAPE
DVD
M1
CBL
M2
AMP
M3
PROGRAM
4
3
2
6