Sennheiser EW 300 G2 - Manual (Page 61)

16
Attaching the microphones
̈
Use the microphone clips
ƻ
to attach the ME 2 and ME 4 clip-on
microphones to clothing (e.g. tie, lapel).
̈
Adjust the ME 3 headmic so that a comfortable and secure fit is ensured.
Positioning the microphones
The ME 3 and ME 4 microphones are directional microphones, i.e. their sound
inlet should always be directed towards the sound source (e.g. mouth).
The ME 2 with omni-directional pick-up pattern picks up sound equally from
all directions. It is the best choice if movements of the speaker’s head have to
be compensated for. However, it should be attached as close as possible to
the sound source.
Adjust the sensitivity correctly for all microphones/usages (see “Adjusting
the sensitivity (transmitters only)“ on page 30).
Attaching the bodypack transmitter to clothing
The bodypack transmitter is attached to clothing (e.g. belt, waistband) with
the supplied belt clip.
The clip is detachable so that you can also attach the bodypack transmitter
with the antenna pointing downwards. To do so, withdraw the clip from its
fixing points and attach it the other way round.
The BPP 1 bodypack pouch (available as an accessory) helps to protect the
bodypack transmitter against moisture.
ƻ