Adjustment tips for the operating menu, Switching between channel banks, Switching between the channels in a channel bank – Sennheiser EW 300 G2 User Manual

Page 73

Advertising
background image

28

Adjustment tips for the operating menu

Switching between channel banks

BANK

Bank

Via the “

Bank

” menu, you can switch between the nine channel banks. The

channel banks “1” to “8” have eight switchable channels that are factory-
preset to a transmission/receiving frequency (see “The channel bank
system“ on page 4). The channel bank “U” (user bank) has eight switchable
channels to store your selection out of 1440 transmission/receiving
frequencies that are freely selectable within the preset frequency range.

When switching from one channel bank to another, the channel with the
lowest channel number is automatically displayed. If, during the last scan of
this channel bank, an interfering frequency was detected on the channel with
the lowest channel number (see “Scanning the channel banks for free
channels (EM 300 G2 only)“ on page 29), the receiver display panel
automatically displays the next free channel.

Switching between the channels in a channel bank

CHAN

Channel

Via the “

Channel

” menu, you can switch between the eight channels in a

channel bank.

Always set the transmitter and the receiver of a transmission link to the same
channel. After scanning the channel banks (see “Scanning the channel banks
for free channels (EM 300 G2 only)“ on page 29), only the free channels are
displayed. Set the transmitter to one of the free channels.

Selecting the frequencies to be stored
in the channel bank “U”

TUNE

Tune

Via the “

Tune

” menu, you can select the frequencies to be stored in the

channel bank “U” (user bank).

When you have selected one of the channel banks “1” to “8” and then select
the “

Tune

” menu, the transmitter or receiver automatically switches to

channel 01 of the channel bank “U”. In this case, “U.01” briefly appears on
the display.

̈

Use the

̆

/

̄

buttons to select the desired transmission or receiving

frequency. Transmission and receiving frequencies are tunable in 25-kHz
steps within a switching bandwidth of 36 MHz max. For intermodulation-
free frequencies, please refer to the enclosed frequency table.

Advertising