Sony SCP-3810 - Manual (Page 14)

2 1A. Setting Up Service
ࡗ Setting Up Your Phone (page 2)
ࡗ Activating Your Phone (page 3)
ࡗ Setting Up Your Voicemail (page 4)
ࡗ Sprint Account Passwords (page 4)
ࡗ Getting Help (page 5)
Setting Up Your Phone
1. Install the battery.
Ⅲ Insert the battery into the opening on the back of
the phone, making sure the connectors align
(
), and gently press it down ( ).
Ⅲ Position the battery cover and slide it upward until
it snaps into place (
).
2. Press to turn the phone on.
Ⅲ If your phone is activated, it will turn on, search for
Sprint service, and enter standby mode.
Ⅲ If your phone is not yet activated, see “Activating
Your Phone” on page 3 for more information.
3. Make your first call.
Ⅲ Use your keypad to enter a phone number.
Ⅲ Press .
1A. Setting Up Service
Note Your phone’s battery should have enough charge for
your phone to turn on and find a signal, set up your
voicemail, and make a call. You should fully charge
your battery as soon as possible. See “Charging the
Battery” on page 15 for details.