Sony SCP-3810 - Manual (Page 84)

72 2F. Voice Services
Making a Voice Call Using ASR
1. Press and hold or .
2. When you hear “Say a command,” say “ Call .”
3. When you hear “Say the name or number,” say a
name or a phone number.
4. When you hear “Which location?,” say a number
type (for example, “Mobile”).
Sending a Text Message Using ASR
1. Press and hold or .
2. When you hear “Say a command,” say “ Send Text .”
3. When you hear “Say the name or number,” say a
name or a phone number.
4. When you hear “Which location?,” say a number
type (for example, “Mobile”). The phone displays
the text entry screen. (See page 101 for how to
compose a message.)
Displaying a Contacts Entry’s Information
Using ASR
1. Press and hold or .
2. When you hear “Say a command,” say “ Lookup .”
3. When you hear “Say the name,” say a Contact
entry’s name. The phone displays the detail screen
for that Contacts entry.
Tip You can skip steps 3 and 4 by saying a name and
location after “Call” without pausing (for example,
“Call John Jones mobile”).
Note If ASR does not recognize the name or number, it
will find the most likely matches and display a list
of up to three names or numbers. You will hear
“Did you say Call…” followed by the name or
number. You can confirm by saying “Yes.” Say
“No” to change the selection.