Sony SCP-3810 - Manual (Page 47)

Se
ttings
2B. Settings 35
Volume Settings
Adjusting the Phone’s Volume Settings
Adjust your phone’s volume settings to suit your needs
and your environment.
1. Press > Settings > Volume .
2. Select Incoming Ringer , Playback Volume , 
Power Up/Down , or Key Beeps .
Ⅲ If you select Power Up/Down , select On or Off .
Ⅲ If you select Key Beeps , select Tone Volume or 
Tone Type .
3. Select a volume level or type and press
To change the incoming ringer or playback volume:
1. Press the volume button up or down for most
applications, including playing sounds. A volume
setting screen is displayed.
2. Press the volume button up or down to select the
volume level, and then press
or close the
phone. (When the Ringer and Playback tabs are
both displayed, you can switch between tabs by
pressing the navigation key left or right.
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
ᮣ Press and hold the volume button down in standby
mode. (The screen will display “Silence All.”)
To deactivate Silence All:
ᮣ Press the volume button up repeatedly to select a
volume level.
Tip You can make the incoming ringer vibrate at any
volume level by pressing VIBRATE (left softkey) on
the volume setting screen.