Continued) – Sharp MD-C2H User Manual

Page 13

Advertising
background image

<P=003>

(Continued)

■

When choosing a CD for playback

Press one of the CD PLAY 1

0

- 3

0

buttons to select the CD

you want to listen to.

●

Only the selected disc will be played back.

When selecting
disc 1

When selecting
disc 2

When selecting
disc 3

Notes:

●

If the disc tray is open, it will be automatically closed.

●

If the

0 6

button is pressed, continuous playback will begin

from the first track of the disc you have selected.

To interrupt playback:

Press the

0 6

button.

To resume playback for just a single disc:

Press the CD PLAY 1

0

- 3

0

button whose number matches

the frame which is currently flashing.

Caution:

●

Do not carry the unit whilst CDs are in the trays or
a MiniDisc is loaded. The discs may come loose
inside the unit and they may be damaged or cause
damage to the unit. This may also cause malfunc-
tions.

●

Do not place two CDs in one disc position.

●

Do not push the disc tray whilst it is moving.

●

Do not attempt to push the disc tray by hand.
This may cause malfunctions.

●

If the power fails whilst the tray is open, wait until
the power is restored.

●

If the disc tray is stopped forcibly, "TRAY ERR" will
appear in the display and the unit will not function.
If this occurs, press the ON/STAND-BY button to
enter the stand-by mode and turn it on again.

●

If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.

●

If a disc is damaged, dirty, or loaded upside down, the disc
will be skipped and the next disc will automatically play.

●

If the CDs are dirty or have label adhesive on their surface,
make sure to clean them before loading.

●

If the

0 6

button, any of the CD PLAY 1

0

- 3

0

buttons

or the

7

OPEN/CLOSE button is pressed when a disc tray

is open, the disc tray will close automatically. Be careful not
to catch your fingers.

●

If the unit is shaken by impact or vibration, playback may be
disrupted. If the playback volume of a CD is raised excess-
ively, playback may be disrupted. If this occurs, lower the
playback volume.

1 -

CD PLAY

3

1 -

CD PLAY

3

MD-C2H(SUK) TINSE0238AWZZ

12

Advertising