Sharp MD-C2H - Manual (Page 40)

<P=003>
(Continued)
■ Move
Before making editing changes, check the disc number.
1
Whilst in the stop mode, select the track you want to move
using the jog dial.
Or start playing the track to be moved, and then press the
0 6 button to enter the pause mode.
2
Press the NAME/TOC EDIT button, and within 10 seconds,
select "MOVE" using the jog dial.
3
Within 10 seconds, press the ENTER button.
4
Select the new track position using the jog dial.
● To cancel the operation, press the ■ button.
5
Press the ENTER button again.
● The track is moved, and the unit is stopped at the beginning
of the track.
Note:
● When a track has been moved, the other tracks which are
affected will be assigned new track numbers automatically.
Example:
When moving the fifth track to the third track, the old third track
will become the new fourth track, and the old fourth track will
become the new fifth track.
● This function cannot be used whilst a programme is being en-
tered ("MEMORY" is lit: Page 29) or whilst in the random play
mode ("RANDOM" is lit: Page 28). First, cancel the programme
or random play mode before trying to use this function.
ENTER
NAME/
TOC EDIT
1
2
3
4
5
Jog dial
MD-C2H(SUK) TINSE0238AWZZ
39