Samsung Colour TV/VCR - Manual (Page 25)

25
This set has an inbuilt tape alignment system (A.TRK) that selects
the optimum position for the tape automatically. If, however, noise
bars (streaks) appear at the top or bottom of the picture during
playback (particularly in slow motion), you can adjust the
alignment of the image to obtain the best possible picture.
Picture stability can be adjusted more easily in the Pause and Slow
Motion modes.
To adjust alignment, press the TRK or buttons until the picture is clear
and stable.
➢
Even if you cannot remove all noise bars, choose the
setting that gives the clearest picture.
Adjusting the Picture Quality during Playback
Adjusting the Picture Contours
When playing back a cassette, you can change the picture contours
in line with your personal preferences. Three settings are available:
◆ Normal, Sharp, Soft
1 Press V.MENU ( ) to display the VCR menu.
2 Select the PICTURE option by pressing the P ▲ or ▼ buttons the required
number of times.
3 Press + or - to select one of the following options:
NORMAL for a standard picture
SHARP for a crisper picture
SOFT for a softer picture
4 When you are satisfied with the setting, press V.MENU ( ) one or more
times to return to normal viewing.
VCR MENU
RECORD PROGRAMME
REPEAT
: OFF
PICTURE : NORMAL
TAPE SELECT : E180/T120
V.SYSTEM : AUTO
ADJUST SELECT EXIT
Using the Crystal PlayBack
Press CRYSTAL PB to compensate a poor rental tape.
1 Insert a tape and press PLAY.
2 Press the CRYSTAL PB button on the remote control, and then CRYSTAL
PB option is displayed with Off .
3 To activate (to On ) the feature, press the CRYSTAL PB button again.
➢
◆ The Crystal Playback (IPC) activates only when a tape is
being played.
◆ If the tape is reinserted, the CRYSTAL PB becames Off .
CRYSTAL PB Off
REC
TRK CLEAR LANG.SEL
EJECT
INDEX SLEEP MEMORY
P/S CRYSTAL PB
REC
TRK CLEAR LANG.SEL
EJECT
INDEX SLEEP MEMORY
P/S CRYSTAL PB
V.MENU MUTE
P
02255A_eng2_mono 6/29/04 10:45 AM Page 25