Samsung Colour TV/VCR - Manual (Page 5)

5
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
Plug the aerial or cable network input cable into the socket at the bottom of the
television’s rear panel.
➢
If you wish to subscribe to a cable network, contact your
local dealer.
This COMBI VISION is fully equipped to receive scrambled Pay TV
broadcasts.
Example: Premiere broadcasts.
➢
If you wish to connect both a decoder and an external
VCR to the SCART connector, you must plug:
◆ The decoder into the VCR
◆ The VCR into the COMBI VISION (refer to
“Connecting Other Video Equipment” on the
following page for further details)
1 Plug the SCART cable supplied with the decoder into the SCART
connector on the rear of the set.
2 Plug the other end into the decoder.
Connecting the Aerial or Cable Television Network
Connecting a Decoder
Cable
Television
Network
REAR OF THE
TELEVISION
REAR OF THE TELEVISION
or
SCART
Decoder
02255A_eng1_mono 6/29/04 10:42 AM Page 5