Samsung Colour TV/VCR - Manual (Page 36)

36
GB
Each time you record a cassette, an “index” is automatically
marked on the tape when recording starts.
The Search function enables you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
➢
This VCR unit uses a standard indexing system. As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
1 To search for a specific index, press INDEX.
2 Enter the number of the index to be found using the numeric buttons.
➢
When entering a single digit number, do not forget to precede it with
a zero.
Example:
02.
Result: The index number is displayed.
3 Select the direction in which the VCR unit is to search:
◆ REW ( ) to search backwards
◆ FF ( ) to search forwards
Result: When the index is found, cassette playback starts.
Scanning the Index Markings
Using the Indexes to Search for a Sequence
You can scan the various indexes on the cassette to find the
beginning of the programme or sequence that you wish to watch.
1 To scan through all indexes in a given direction, press:
◆ INDEX to start the search
◆ REW ( ) or FF ( ) within six seconds to indicate the direction
Result: The SCAN & PLAY indication is displayed. When an index is
found, the VCR unit:
◆ Plays the sequence for five seconds
◆ Scans for the next index until it reaches the beginning or
end of the tape
2 Press:
◆ PLAY ( ) when the required sequence is reached
or
◆ STOP ( ) to stop the scan
➝
etc.
Prev
seq.
Seq. being
played
Next
seq. etc.
2 1 1 2
SCAN & PLAY
Pre.
V.MENU MUTE
P
REC
TRK CLEAR LANG.SEL
EJECT
INDEX SLEEP MEMORY
P/S CRYSTAL PB
02255A_eng3_mono 6/29/04 10:47 AM Page 36