Samsung Colour TV/VCR - Manual (Page 28)

Recording a Programme Directly
Before recording a programme, you must have stored the
corresponding channel. If you have not done so, refer to page 13 or
16 for more details.
➢
◆ If you have 1 tuner model, you cannot record one
programme while watching another.
◆ If you have dual tuner model, you can record one
programme while watching another.
1 Select:
◆ The TV station to be recorded using the P ▲ or ▼ buttons
or
◆ The AV source using the INPUT ( ) button for a satellite tuner or
external video source
Result: The channel number is displayed and the programme can be
seen on the television.
2 Insert the cassette on which the programme is to be recorded, with the
window visible and the safety tab intact or the opening covered with
adhesive tape.
3 Hold REC ( ) down for at least two seconds to start recording.
Result: The record indicator appears on the screen. An index is
recorded on the tape (see page 36).
During recording you can also press DISPLAY ( ) to
display the number of the programme being recorded and the
remaining time on the cassette.
4 To... Then press...
Stop recording temporarily (to avoid recording P/S ( ).
TV spots or to change channels for example)
Start recording again P/S ( ) or REC ( ).
Stop recording completely STOP ( ) once.
➢
If the VCR is left in Pause mode for more than ten minutes,
recording will be stopped automatically to protect the heads and the
cassette.
➢
If the cassette is ejected when you start recording,
check that the safety tab is intact or the opening is
covered with adhesive tape.
If you reach the end of the tape while recording,
the cassette rewinds automatically.
28
GB
Pre.
V.MENU MUTE
DISPLAY
REC EJECT
INDEX SLEEP MEMORY
P/S CRYSTAL PB
P.STD
MENU
INPUT
P
P
02255A_eng2_mono 6/29/04 10:45 AM Page 28