Sony SNC-VL10P - Manual (Page 21)

Se
tt
in
g
s
b
y
A
d
m
ini
s
tra
to
r
Setting the Security — Security Setting Page
21
Setting the Security
— Security Setting Page
When you click Security in the menu section, the
Security Setting page appears.
Use this page to limit the computers that can access the
camera or display the monitor image.
IP/Subnet Filtering Mode
Limits access to the camera by the IP address and
subnet.
Disable/Enable
Select Enable when you want to limit the access to the
camera, or Disable when you do not want to limit the
access.
To set a limit, use the following items.
Default Policy
Select the basic policy of the limit from Allow and
Deny.
If you select Allow, you will basically allow access to
the camera, and only deny access to the camera from the
computers having the IP addresses specified on IP/
Subnet Client Address 0 to 9 below. If you select
Deny, you will basically deny access to the camera, and
allow access to the camera from the computers having
the IP addressed specified below only.
IP/Subnet Client Address 0 to 9
Type the IP addresses and subnet addresses you want to
allow or deny access to the camera. You can specify up
to 9 IP addresses and subnet addresses. For a subnet
address, type 0 to 32.
To temporarily cancel the Default Policy for an IP
address/subnet, select Allow or Deny from the drop-
down list on the right.
Image Encryption Mode
Limits the display of the monitor image by the image
encryption.
Disable/Enable
Select Enable when you want to encrypt the image, or
Disable when you do not want to perform the
encryption.
Encryption PIN Number
Type a PIN (Personal Identification Number) to allow
displaying the monitor image of up to 11 characters.
When Image Encryption Mode is set to Enable, a
dialog to request the input of the PIN number appears
when a user logs in the camera, returns to the viewer
page from the FAQ or Version page or enters the Camera
Setting page. The user can view the monitor image by
typing the PIN number specified here.
Apply/Cancel/Help
See “Buttons common to every setting page” on page
15.