Sony SNC-VL10P - Manual (Page 9)

Op
er
at
ions
b
y
Us
e
rs
Monitoring the Image from the Camera
9
Image Control Section
Image Size
Selects the image size.
See “Selecting the image size” on page 10.
Expansion
Selects the image expansion ratio.
See “Expanding the image” on page 10.
Frame Rate
Selects the frame rate to transmit images.
See “Selecting the frame rate” on page 10.
Monochrome
Select this check box to display the image in
monochrome.
See “Displaying the monitor image in monochrome” on
page 11.
Singleshot
Select this check box to freeze the monitor image.
See “Freezing the monitor image” on page 11.
Capture
Click to capture the monitor image.
See “Capturing the monitor image” on page 11.
Sensor 1
Click to output an alarm from Output 1 of the Sensor I/
O port on the camera.
See “Outputting an Alarm” on page 11.
Sensor 2
Click to output an alarm from Output 2 of the Sensor I/
O port on the camera.
See “Outputting an Alarm” on page 11.
Note
Sensor 1 and Sensor 2 are disabled for the users whose
access right is None.
Logon User
Displays the number of users currently accessing this
camera.
Location
Displays the location of the camera.
For setting the location, see “Configuring the System —
System Setting Page” on page 15.
Comment
Displays the comment.
For setting the comment, see “Configuring the System
— System Setting Page” on page 15.
Monitoring the Image
from the Camera
About Viewers
The Network Camera uses Wavelet algorithm to
compress and transmit images. Therefore, in order to
view images from the camera, you need to download a
viewer plugin depending on your Web browser and/or
OS.
Using the Internet Explorer
Active-X Control is necessary. When you log in the
camera using the Internet Explorer for the first time, the
Active-X Control is automatically downloaded. You do
not need to install it. The monitor image automatically
appears when you enter the Main Viewer page.
Using the Netscape Ver. 4.x-series
You need to download the plugin for Netscape stored in
the camera. When you log in the camera using Netscape
for the first time, the “Plugin Download” page appears.
Click Download SNC-V10P Plug-in Now! and follow
the instructions on the screen.
Plugin Download page